How to Change Cabin Air Filter and Engine Air Filter for 2020 Subaru Outback

Here are pic­tures doc­u­ment­ing the change/replacement of the cab­in and engine air fil­ters of my 2020 Sub­aru Out­back Onyx XT.

Project dura­tion: 10 min­utes under good con­di­tions

Tools need­ed: Hands, maybe a flash­light.

Cab­in Air Fil­ter

Open your glove com­part­ment.

There’s a tab on the right hand side when you open it. Just tug on it high­er up and it comes right off.

On either side of the glove box, are hinges as shown in the upper pic­ture. Push hard on either side to pop them out. It might be hard to do if your car is new­er or when it’s cold. Mine qual­i­fied under both con­di­tions and I had a heck of a time.

Aaaand, it final­ly came out!

Here’s a close­up of one of those hinges. Sub­aru gave it extra felt. Kin­da nice.

And here you have the cab­in air fil­ter box.

I could­n’t fig­ure out how to remove this piece and man­aged to break off one of the clasps on the side of the cab­in air fil­ter box like an idiot. 🙁 All you have to do is squeeze those two things on the bot­tom at the same time and it comes right off.

Here’s the old one.

I don’t think the fil­ter has been changed since I first bought the car Nov of 2019, so it’s been over a year (it is mid-Feb 2021 right now). That’s a gen­uine Sub­aru cab­in air fil­ter.

This is the new fil­ter installed. **N.B. From var­i­ous online videos, I hear that Sub­aru’s air flow is from top to down, but Sub­aru is appar­ent­ly one of the few (if not the only) car man­u­fac­tur­ers for which the OEM cab­in air fil­ter arrow does­n’t cor­re­spond with air flow direc­tion. If you’re using after­mar­ket, then make sure you fol­low the air flow.**

OK, then you just put it back togeth­er. Cov­er on the fil­ter box, line up the bot­tom hinges of the glove box and sim­ply push up until it snaps in, then make sure you replace the lit­tle clasp on the right side and BOOM, you’re done!

Engine Air Fil­ter

Open the hood

On the left side of the engine bay, find this and unhook the met­al clasps.

If you wig­gle it apart, you’ll see the old engine air fil­ter.

Just pull it out.

I used a gen­uine Sub­aru engine air fil­ter. The new one is on the left and the old one on the right.

You just slide it in there, foam-side fac­ing the back of the car, close up the clasps, and you’re done!

Yay!

Flashing Oil and Brake Lights 2012 Subaru Outback

Prob­lem: AT Oil Temp and Brake lights flash­ing, while the TCS light is sol­id.

Solu­tion: Turns out that both of my brake lights were out (because I did­n’t use gloves while replac­ing the bulbs a few months ago). Replaced them and haven’t had any issues since (it has been 5 days).

Dif­fi­cul­ty: Super easy.

I was dri­ving home from work on Fri­day when all of the sud­den (iron­i­cal­ly the exact same place where I got my bad flat last year) the lights on my dash light up! I was freak­ing OUT. The brake light and AT Oil Temp lights were blink­ing like crazy and the Trac­tion Con­trol light was sol­id. Those were the only lights and even though I was freak­ing out, my car was dri­ving per­fect­ly fine, no weird smells or nois­es. The check engine light was­n’t lit up. My mind kept going through all the worst case sce­nar­ios and rea­son­ings. I’d lit­er­al­ly just got­ten my car back from the shop after a very expen­sive brake and rotor replace­ment and I could only deduce that had some­thing to do with it, but how? Every­thing felt fine. It was then that I remem­bered that at a light a few min­utes ear­li­er, a nice man in an old car told me that both of my brake lights were out. That kept nig­gling around in my head, but giv­en that I had a while to go to get back home, I’m still anx­i­ety-rid­den that my car was about to erupt into flames or stop mov­ing ran­dom­ly or have smoke bil­low­ing from all over. I man­age to stop by Advanced Auto Parts to ask for a code read and the dude was look­ing at it all stumped. No codes, noth­ing wrong under the hood. I bought some brake lights from him and got back into my car. Lights were off now and I kept brac­ing for them to come back on, which final­ly did hap­pen about 10 min­utes lat­er, but by then my car seemed fine so I felt only mild­ly ner­vous dri­ving home.

Safe­ly there, I furi­ous search the inter­net and only on some ran­dom forum page 15 min­utes lat­er on a sim­i­lar but not quite top­ic, I find anoth­er sit­u­a­tion like mine, except he replaced both of his brake lights and it was fine. I was like, huh, coin­ci­dence? Not too like­ly. As it turns out, that was the answer. Replac­ing the burned out brake lights. GO fig­ure it was that easy. Make sure you use gloves when you replace those bulbs, kids. Oth­er­wise the oil from your fin­gers sit on the bulb, heat up and BOOM. Burnout.