Tag: no

Front License Plate Frame Installation Mustang Mach‑E: Drill & No-Drill

writ­ten 2/17/25, updat­ed 7/13/26

Overview

What

Installing a front license plate frame by both drill and no-drill meth­ods for 2024 Ford Mus­tang Mach‑E GT Ral­ly

Why

To com­ply with state reg­u­la­tions for dis­play of front tags

Time and Effort

Time: 5–20 min­utes

Effort: Easy

Materials & Cost

Supplies

No-Drill

  • 3M Dou­ble Sided Water­proof VHB Mount­ing Foam Tape, 1.18in x 16.5 ft
  • Scis­sors
  • 91% Iso­propyl Alco­hol Wipe
  • Adhe­sion Pro­mot­er
  • 180–320 grit Sand­pa­per
  • Painter’s Tape
  • License Plate Frame (OEM)
  • Plate Frame Hard­ware (OEM)

Drill

  • Plas­tic (Poly) Riv­et Gun
  • 1⁄4″ Drill Bit and Dri­ver
  • License Plate Frame (OEM)
  • Plate Frame Hard­ware (OEM)

Cost

  • $16.99 for 3M tape roll (Ama­zon)
  • $13.95 for 3‑pack Adhe­sion Pro­mot­er pack­ets (Ama­zon — $4.65 per pack­et)
  • $17.99 for Plas­tic Riv­et Gun set (Ama­zon or cheap­er from Har­bor Freight)
  • Free all oth­ers (owned, came with car)

Process: Drill

Pros: Secure, wor­ry-free, fast

Cons: Cre­ate holes in bumper (could affect col­lec­tor’s val­ue), can’t remove eas­i­ly

  • Find fac­to­ry dim­ples on the bumper
  • Using a 1⁄4″ drill bit, drill holes
  • The 3rd/bottom hole does not have a fac­to­ry guide dim­ple

Hint: Align and hold the frame to the car in line with the 2 dim­ples to use it as a tem­plate for the bot­tom hole dur­ing instal­la­tion

  • Find the plas­tic Pop Riv­ets that came with the frame. Push them through the frame and into the bumper
  • Slide the Riv­et Gun over the part stick­ing out, and squeeze. This will com­press the anchor back against the bumper. Release and squeeze again. You should hear a loud CLICK and the rod should come off (*See Notes for a look into how it works)

NOTE: You might have to squeeze a few times, mak­ing sure the gun is seat­ed all the way against the frame. If it fails (the rod breaks off, but the riv­et does not hold) push it out and try with the oth­er riv­et. In case this hap­pens, and you don’t have a spare, make sure to do the top 2 holes first because the frame will hold fine with just two attach­ments. See Notes sec­tion for more infor­ma­tion on the hard­ware

  • Slide the plate into the brack­et, secure with screws

DONE!

Process: No-Drill

Pros: Remov­able, no holes drilled into bumper, no mar after removal

Cons: Not 100% secure, chance of los­ing plate and frame

WARNING: My attempt at this failed after a month. At the time, it was installed in the cold win­ter weath­er, and I did not employ the use of an adhe­sion promoter/sandpaper. This is writ­ten with the revi­sions in place. Employ at your own risk!! *See NOTES sec­tion for my updates regard­ing success/failure

  • Make sure your license plate frame has enough sur­face con­tact areas to adhere it well to the car with 3M tape

This is the vehi­cle’s orig­i­nal plate frame

  • Go out to your car and dry-fit the frame accord­ing to the fac­to­ry dim­pling on the bumper
  • Using painter’s tape, mark out bor­ders to help with align­ing (Use strips that attach to both the frame and the car for eas­i­est align­ing)
  • Install license plate to frame (Can do this as the last step, if you pre­fer)

The OEM hard­ware will not scratch the car, stop­ping short of the end of the holes

  • With 180–320 grit Sand­pa­per, use cir­cu­lar motions to rough up the sur­faces where the tape will attach
  • Soak either a cot­ton pad or cot­ton ball with Rub­bing Alco­hol (high­er per­cent will dry faster) or use alco­hol wipes
  • Wipe down sur­faces with the alco­hol and wait for them to dry all the way
  • Open the Adhe­sion Pro­mot­er pack­et (I’d rec­om­mend gloves here) and wipe each con­tact point with a thin lay­er
  • Allow to dry (90–120 sec­onds)
  • Mea­sure out and cut the VHB 3M Tape to the size you need for your plate
  • Apply the sticky side to the plate, leav­ing the oth­er side of the tape (the one that will con­tact the car) still cov­ered

NOTE: 3M’s instruc­tion for this tape rec­om­mends heat­ing up with a hair dry­er if using in the win­ter. This tape is also move­able until com­pressed and mov­ing it should not affect adhe­sion prop­er­ties. Vis­cos­i­ty reach­es max­i­mum increase by 72 hours.

  • Rec­om­mend­ed: par­tial­ly remove the lin­ers in the house before going out­side. It can adhere tight­ly, so you may need to use tweez­ers if your fin­ger­nails aren’t able to get a good hold
  • Go out to your car
  • Dry fit the frame again, if you’d like
  • Use Rub­bing Alco­hol to wipe clean the install area of the car, mak­ing sure all for­eign debris is removed (oth­er­wise the tape will adhere to the debris instead of the car)
  • Wait until it it has evap­o­rat­ed
  • Peel off the lin­ers from the mount­ing tape
  • Align with the painter’s tape
  • Press
  • Keep press­ing with decent pres­sure for at least a minute (I did around 2–3 min­utes. It was eas­i­est with my feet while I messed around on a phone for a bit)
  • Remove the painter’s tape

Done!

Notes

  • Update 2/27/25 (10 days lat­er): Still hold­ing strong and no prob­lems! Been on the high­way, through work zones, lots of pot­holes, speed bumps, took turns too quick­ly, and plen­ty of stop and go traf­fic. So far, so good.
  • Update 3/25/25 (1 month): FAILURE!! Went to walk the dog and found the license plate frame on the ground! Good thing it was at home. I’ve decid­ed to leave the instruc­tions and post, up, though, because I still think it’s doable with some revi­sions. It’s impor­tant to note that all the 3M tape was still adhered well to the car. In fact, they were dif­fi­cult to remove. Removal left a clean, unmarred sur­face — exact­ly the point of adher­ing as opposed to pok­ing holes. This means that the fail­ure point was on the side of the brack­et, and not the tape or the car por­tion. I won­der if it was because the weath­er start­ed to change. I installed it in the cold win­ter, and it fell off when the days warmed up and overnight.
  • Update 3/30/25: Com­pro­mise. While I did not want to risk the plate falling off again (what if it hap­pens while on the road?) I still think that it’s pos­si­ble to adhere with 3M tape with­out drilling. So, what I did this time was use the drill method for the top two holes and applied the revi­sion process (adhe­sion pro­mot­er and sand­pa­per) for the low­er hole. That way, I have it secure AND I did­n’t drill into non-dim­pled bumper. I will mon­i­tor and con­tin­ue observ­ing the bond of the low­er por­tion of the frame at reg­u­lar inter­vals to see if it holds up
  • Update 8/24/25: With the phys­i­cal attach­ments, my brack­et has not fall­en off (of course). I went to try and tug on the bot­tom part of the frame where there is just the adhe­sion, and while it did­n’t move much, I can’t real­ly get a good read because of the hard­ware on the upper por­tion. At this point, I’m going to say that I do NOT rec­om­mend the No-Drill method, but you are wel­come to try! If you do, com­ment and let me know if it works for you!
  • Update 7/13/26: While the Drill Method still holds on well (nev­er thought it would­n’t), I still do not rec­om­mend the No-Drill Method. The tem­per­a­tures have gone up past 100F and down past 0F, there’s been crazy wind and down­pours, ice like con­crete, and I feel strong­ly that with­out the pop riv­ets, there’s only a minis­cule chance the tape will hold unless you hap­pen to live in an extreme­ly tem­per­ate area with min­i­mal swings.
  • If you look at the word­ing on the back of the plate frame, you see the let­ters “PP+EPDM.” These stand for PolyPropy­lene (PP), plas­tic, and eth­yl­ene-propy­lene-diene monomers (EPDM), a syn­thet­ic rub­ber. 

Hard­ware Infor­ma­tion

Con­tain­er License Plate Hard­ware

BB53-17A386-AA

Ford

1⁄4″ thick­ness in hole

1⁄4″ thick­ness screws

Plas­tic Pop Riv­et — How it Works

Start

Top View

Bot­tom View

For fun, I tried it with dou­ble thick­ness to see what would hap­pen. The first attempt failed, high­light­ing that if the ridged por­tion does not grab, then it will not stay in place and become loose. The sec­ond attempt suc­ceed­ed but was extreme­ly dif­fi­cult to squeeze.

You can see how there’s more of the ridged part on the sin­gle thick­ness before it cut off

Here’s the failed riv­et

The Testament of Sherlock Holmes (Nintendo Switch) SIMPLE Walkthrough

writ­ten 2/17/25, updat­ed 2/17/2025

This is a Sim­pli­fied Ver­sion of the game with­out spoil­ers. For a Detailed Walk­through CLICK HERE

Necklace at the Marquis of Conyngham’s Mansion

  • Fol­low prompts
  • Get Mag­ni­fy­ing Glass, use on sheet music
  • Find print
  • Inspect all clues

221B Baker Street — 1

  • Solve Neck­lace Puz­zle
  • Go to Dio­cese of Knight­bridge on map

Diocese of Knightsbridge — Bishop Maitland’s Murder

  • Get Piece of Rope
  • Get Fin­ger
  • Get Bro­ken Phial
  • Get Met­al Rod
  • Get Scalpel
  • Solve Foot­print Puz­zle
  • Inspect all clues
  • Solve Deduc­tion Board
  • Use Met­al Rod on door lock
  • Solve Lock Puz­zle
  • Inspect all clues
  • Get Horse’s Head, use on floor
  • Solve Knight’s Tour Puz­zle
  • Use Knife
  • Choose one of avail­able options
  • Solve Chest Puz­zle

221B Baker Street — 2

  • Use Bro­ken Phial on desk
  • Solve Chem­i­cal Analy­sis Puz­zle
  • Use any remain­ing clue on the desk
  • Ana­lyze
  • Get book
  • Solve Deduc­tion Board 1
  • Choose the right loca­tion
  • Solve Deduc­tion Board 2
  • Choose 1 of 3 loca­tions to start an inves­ti­ga­tion

Investigation A: Westgate Jail

  • Go to the Direc­tor’s office
  • Inspect clues
  • Get Pass
  • Talk to recep­tion­ist
  • Use Pass on room near entrance
  • Ask about all sub­jects
  • Go into prison
  • Talk to Hans Schiel­man
  • Talk to War­den
  • Talk to Recep­tion­ist and Direc­tor
  • Talk to War­den
  • Use Keys on door across from Direc­tor’s office
  • Inspect lock­er
  • Solve Schiel­man’s Puz­zle Box
  • Get Han­s’s Pen
  • Talk to entrance guard Brighton
  • Get Key for Brighton’s Lock­er and Brighton’s Suit
  • Use Brighton’s Key on door next to Direc­tor’s Office
  • Get Key “Jen­ny Pat­ter­son”
  • Place Brighton’s Suit in lock­er
  • Use Jen­ny’s Key on her lock­er
  • Solve Pat­ter­son Puz­zle Box
  • Get Brighton’s Lock­et, Let­ter from Brighton, and Guard Duty List
  • Talk to recep­tion­ist
  • Talk to War­den
  • Give Schiel­man his Pen
  • Talk to Direc­tor
  • Inspect alarm
  • Talk to War­den through the bars
  • Get Keys
  • Go out and around the cor­ner to prison door
  • Talk to “War­den O’Sul­li­van”
  • Use Keys
  • Use Keys
  • Solve Alarm Puz­zle

Investigation B: Kensington Gardens

  • Talk to Land­la­dy
  • Inspect all clues
  • Get Spade, Rake, and Clothes Pegs
  • Use Spade on fence
  • Get News­pa­per “The Strand”
  • Inspect clues
  • Use Rake on tree
  • Get Tat­tered Clothes
  • Talk to land­la­dy
  • Get Scarf
  • Inspect clues
  • Get Torn-up Pieces of Paper, place on desk
  • Solve Paper Puz­zle
  • Use Clothes Pegs
  • Use Match­es
  • Solve Invis­i­ble Ink Puz­zle
  • Use Spade near win­dow
  • Solve Com­bi­na­tion Puz­zle Box
  • Solve Miss­ing Pieces Puz­zle
  • Have Toby fol­low foot­prints
  • Get Grease, use on lever
  • Solve Pil­lar Puz­zle
  • Low­er bridge
  • Try door
  • Undo Rope
  • Unlock door
  • Get Iron Bar, use on big doors
  • Inspect clues
  • Go towards side of locked gate
  • Pull lever on wall
  • Remove chocks
  • Inspect clues
  • Go up ramp of items
  • Inspect clues
  • Remove sacks near crates
  • Go in
  • Pull rope pul­ley
  • Fol­low foot­steps until reach con­crete stairs
  • Go through door
  • Head down

Investigation C: Whitechapel Street

  • Go into pub­lic dis­pen­sary
  • Talk to doc­tor
  • Go out to the church
  • Go into ceme­tery
  • Get Fly­er from shed
  • Inspect all clues
  • Talk to man run­ning soup kitchen
  • Inspect table next to cart
  • Ask man about “mon­ey game”
  • Play Mon­ey Game
  • Talk to man
  • Go back to dis­pen­sary and talk to doc­tor
  • Take list of dead
  • Inspect jack­et
  • Use Scis­sors from work­table
  • Get Met­al Core, Keys, and Plan
  • Go back to ceme­tery
  • Solve Locked Box next to shed
  • Get Note from Ceme­tery
  • Get Axe, use on box
  • Use Knife
  • Get Note from the Ceme­tery Ban­dits
  • Inspect and solve Tree Puz­zle
  • Find sym­bol on grave­stone
  • Get Shov­el from shed, use on grave
  • Solve Grave Puz­zle Box
  • Get Key and Ham­mer
  • Inspect oth­er shed
  • Choose from options
  • Get Kurtz’s Address
  • Leave ceme­tery
  • Find Kurtz’s house and use Key
  • Inspect all clues
  • Get Kurtz’s Let­ter
  • Solve Deduc­tion Board 1
  • Go to morgue, talk to doc­tor
  • Exam­ine body
  • Get Kurtz’s Map and Full Pipette
  • Solve Chem­i­cal Analy­sis
  • Solve Deduc­tion Board 2
  • Go to opi­um den
  • Inspect all clues
  • Get Ash­es + Tea + Dirty Water = Lousy Booze
  • Use on only awake patron
  • Solve Chi­nese Key Puz­zle
  • Get Stick and Bil­hook
  • Inspect clues
  • Get Bar­bi­turic Acid, Syringe, and Tea­spoon with Opi­um Beads
  • Use Tea­spoon and Match­es
  • Get Liq­uid Opi­um + Bar­bi­turic Acid + Syringe = Syringe with Soporif­ic
  • Remove cloth, use Bill­hook and Stick
  • Use Syringe with Soporif­ic with per­fect tim­ing

221B Baker Street — 3

  • Choose Far­ley’s Office

Farley’s Office

  • Inspect all clues
  • Get Cig­a­rette Case
  • Try door
  • Get Hang­er, use on elec­tri­cal box
  • Solve Elec­tri­cal Box Puz­zle
  • Inspect all clues
  • Get Mes­sage from Far­ley’s Writ­ing Desk and Brush
  • Move to oth­er room
  • Inspect all clues
  • Get Burnt Paper, Bunch of Keys
  • Call Scot­land Yard
  • Inspect all clues
  • Get Pho­to of Prince Woodville, Note from Far­ley, New­pa­per Arti­cle, and Ash­es
  • Use Ash­es on notepad in oth­er room
  • Get Note from Far­ley’s Writ­ing Desk
  • Go to fil­ing cab­i­net and open “DF”
  • Find and get Index Card from Far­ley’s Sec­re­tary
  • Be sure ALL clues are inspect­ed (Hint: end of cig­a­rette if you missed it)
  • Solve Deduc­tion Puz­zle
  • Inspect book­case
  • Solve Book­case Mech­a­nism Puz­zle
  • Get Hat

221B Baker Street — 4

  • Inspect 5 clues on Hat
  • Get File from book­shelf
  • Solve Deduc­tion Puz­zle

Judge Beckett

  • Ring door­bell
  • Enter gate
  • Inspect win­dow
  • Talk to Lucy the Florist
  • Get Hair­pin
  • Talk to Holmes
  • Use Hair­pin
  • Solve Win­dow Lock Puz­zle
  • Get Oar­lock
  • Get School Book
  • Inspect clues
  • Solve Seat­ing Chart Puz­zle
  • Get Door Han­dles, use on cup­board
  • Get Greek Book
  • Solve Roman Numer­al Puz­zle Box Puz­zle
  • Get Oar­lock #2
  • Inspect chalk­board
  • Get Let­ter from Lord Bena­gard
  • Get Cook­ing Oil from kitchen, use on chalk­board
  • Inspect chalk­board con­tents
  • Get Let­ter from Judge Beck­ett, Judge’s Wed­ding Pho­to, and Pho­to of the Judge and His Wife
  • Solve Class­room Map Puz­zle Box
  • Get Key
  • Go out door
  • Inspect clues
  • Get Lord Beck­et­t’s Note and Warn­ing
  • Use Key
  • Get Oar­lock #3
  • Get Pho­to of a Sym­bol
  • Inspect clues
  • Solve Safe Door Lock Puz­zle
  • Solve Locked Safe Puz­zle
  • Attempt to take Oar­locks from lock

221B Baker Street — 5

  • Read Reporter — The Sher­lock Holmes Affair
  • Inspect all clues
  • Inspect draw­er
  • Get and use Nail on the cor­ner of the draw­er
  • Solve Holmes’ Dis­guise Puz­zle
  • Go into room

Holmes’ Hideout — Whitechapel, 6 Buck’s Row

  • Go down street, look at door
  • Choose answers
  • Inspect all clues
  • Get Holmes’ Pipe
  • Get Musi­cal News­pa­per
  • Use Holmes’ Pipe on crys­tal glass­es
  • Get Musi­cal Score, use on micro­scope
  • Get React­ing Agent, use on micro­scope then water basin
  • Get Blot­ting Paper
  • Inspect micro­scope
  • Use Reagent and Blot­ting Paper
  • Get Key, use on brief­case lock
  • Solve Com­bi­na­tion Lock Puz­zle

London Countryside

  • Go to door
  • Get Vod­ka

Switch to Holmes

  • Get Rope
  • Inspect chest
  • Inspect ALL clues on magi­cian’s coat
  • Get Fer­gus­son’s Diary and Mas­ter’s Key
  • Inspect clues
  • Use Knife on moldy flour sacks
  • Get Safe Con­duct Pass­es, Infor­ma­tion Card, and Cog
  • Use Cog on mill axle
  • Go out­side
  • Inspect clues
  • Use Mas­ter Keys on shed
  • Inspect clues
  • Get Screw­driv­er, use on broom near house
  • Get Wood­en Han­dle, use on spade in shed
  • Use Screw­driv­er
  • Get Shov­el
  • Go into attic
  • Use Shov­el on wall
  • Use Rope
  • Use Shov­el on repaired floor boards
  • Get Chain, use to attach mill­stone to rope

Switch to Wat­son

  • Inspect clues
  • Get Paint­brush
  • Get Gear, use on mill mech­a­nism
  • Solve Locked Chest Puz­zle
  • Get Key, use on med­i­cine cab­i­net
  • Get Hydro­gen Per­ox­ide and Ban­dages
  • Hydro­gen Per­ox­ide + Vod­ka + Ban­dages = Ban­dages with Dis­in­fec­tant
  • Use on man

Switch to Holmes

  • Inspect Trap­door

Switch to Wat­son

  • Talk to man
  • Get Gear, use on trap­door

Switch to Holmes

  • Use Gear on mill axle
  • Inspect clues
  • Get paper from hand
  • Get Petrol

221B Baker Street — 6

  • Inspect clues
  • Get Dai­ly Report News­pa­per
  • Go into Holmes’ room

The Sewers

  • Go back­wards
  • Pull rope
  • Get Hook and Rope
  • Inspect cig­a­rette
  • Inspect lad­der, get Lad­der Rung
  • Get Rusty Met­al Bar
  • Get Wire
  • Use Hook and Rope
  • Inspect ser­vice door at water’s edge
  • Lad­der Rung + Rusty Met­al Bar + Wire = Long Iron Bar
  • Use on ser­vice door
  • Get Old Scarf and Piece of Iron
  • Inspect foot­prints
  • Inspect grate
  • Solve Sew­er Grate Lock Puz­zle

221B Baker Street — 7

  • Lis­ten to the truth

Abandoned Fun-Fair

  • Get Iron Bar
  • Inspect all clues of the motor
  • Get Pli­ers
  • Use Knife
  • Get Bot­tle of Oil
  • Use Iron Bar, get Crank
  • Go down path
  • Get Vod­ka
  • Use Vod­ka, Bot­tle of Oil, and Crank on cable car motor
  • Get Piece of Rope (x3)
  • Get Dry Duster
  • Go down stairs
  • Get Emp­ty Bot­tle
  • Inspect win­dow
  • Use Dry Duster
  • Piece of Rope + Piece of Rope + Piece of Rope = Tied Rope + Emp­ty Bot­tle = Attached Emp­ty Bot­tle
  • Use on water tank
  • Water Bot­tle + Dry Duster = Wet Duster
  • Use on win­dow

Switched to Holmes

  • Inspect wall
  • Get Iron Lad­der from cable car loca­tion, use on wall
  • Use Pli­ers
  • Inspect clues
  • Get Giraffe-Shaped Tar­get
  • Go into tent
  • Inspect account book, use avail­able knife
  • Get Secret Accounts
  • Inspect all clues in tent
  • Get Lion-Shaped Tar­get
  • Use Knife under ani­mal game
  • Get Note in Pen­cil
  • Get Mon­key-Shaped Tar­get
  • Use all 3 Tar­gets on ani­mal game
  • Solve Ani­mal Puz­zle
  • Get Wads of Ban­knotes
  • Leave tent along fence and go into build­ing
  • Inspect all clues
  • Get Key, use on med­i­cine box
  • Get Bot­tle of Ether
  • Use Wads of Ban­knotes on 5 loca­tions
  • Use Bot­tle of Ether
  • Get Rope
  • Go into door, inspect all clues
  • Get Part of Crank, use on pole
  • Use Rope
  • Inspect table on stage
  • Get Hans’ Diary and Note from the Fun­fair’s Direc­tor
  • Inspect poster, get Key
  • Knock over bot­tles
  • Use Key on door
  • Open cage
  • Go to car­a­vans
  • Inspect all clues
  • Look into win­dow
  • Get Met­al Plate and Pro­pa­gan­da Tract
  • Go to the­atre
  • Talk to Woodville, choose options
  • Remove red rope
  • Solve Rope Puz­zle
  • Pull lever
  • Get Dia­mond Ring
  • Get Magi­cian’s Belt + Knife = Magi­cian’s Pow­der and Leather Belt
  • Use Magi­cian’s Pow­der and Met­al Plate on bro­ken pipe
  • Inspect all clues
  • Get Saw, Let­ter to the Anar­chists, and Wire
  • Solve Russ­ian Dic­tio­nary Puz­zle
  • Use Saw, get Lad­der (x2) from car­a­vans
  • Go to left side of haunt­ed house
  • Lad­der + Lad­der + Wire = Large Lad­der
  • Use under win­dow
  • Solve break­ing and enter­ing puz­zle

Switched to Wat­son

  • Return to car­a­vans
  • Inspect all clues
  • Get Rag
  • Get Key
  • Use Rag
  • Get Water­ing Can, use
  • Use Key
  • Get Key, use
  • Get Bag of Mar­bles, Let­ter in Russ­ian, and Clock­’s Hand
  • Solve Russ­ian Pad­lock Puz­zle
  • Get Crow­bar, use
  • Solve Explo­sives Paper Fold­ing Puz­zle
  • Inspect all clues
  • Solve Bomb Assem­bly Puz­zle
  • Use Bomb on carousel
  • Solve Bomb Loca­tion Mem­o­ry Puz­zle
  • Use Bag of Mar­bles

Switched to Holmes

  • Inspect all clues
  • Get Key, use
  • Get Act of Trans­fer, and Met­al Core
  • Get Bed­sheet + Bed­sheet = Cloth Rope
  • Use Met­al Core
  • Solve Mori­ar­ty’s Room Pad­lock Puz­zle
  • Get Oil­can
  • Get Planks x5
  • Use Cloth Rope
  • Use Plank
  • Use Oil­can
  • Push door
  • Use Planks
  • Solve Planks on Maze Puz­zle
  • Use Key
  • Inspect clues
  • Use Tele­phone
  • Solve Bomb Con­trol Puz­zle
  • Go to cable car
  • Get Buck­et + Bomb = Bomb in a Buck­et + Leather Buck­et = Bomb Ready!
  • Attach to over­head rope
  • Use Knife
  • Pull lever
  • Return to Haunt­ed House
  • Try door to the left
  • Watch End­ing

GAME COMPLETE!!