How to View House Roof Without Climbing onto It

written 5/19/25, updated 5/19/25

What

Viewing roof without climbing on it

Why

Too tall, unsafe

Effort and Time

Easy & Quick

Sometimes you want to view your roof. You don’t want to pay a professional to come do it you don’t have to, but you also want to know if there’s damage that needs to be addressed. Say, you live in house with more than one-story and you really don’t have a ladder nor want to climb that high, or you simply don’t feel comfortable on one (especially by yourself! I knew a capable, single man whose ladder kicked out and he landed on his feet 2 stories down which fractured both ankles and his back. True story). Here are some options available to you without costing an arm and a leg or a back monetarily and physically (hopefully).

Methods

Disclaimer: There are many different types of situations and house configurations out there. Also, I am NOT a professional, just a DIYer in a townhouse.

Camera on Stick – Easiest, Cheapest Method

Pros: Easy, Fast, Safe

Cons: May have to buy items if you don’t already have them, limited by length and curves

Materials: Livestreaming Camera, Pole (broom, garden, PVC pipe, anything solid and strong), Duct Tape, Phone/Viewing Screen

Cost: You can get a decent camera (beware unreputable brands and apps in case they release malware into your home internet system) for less than $15, Dollar Tree sells broom handles and tape for $1.25 each. Assuming you own a smartphone and nothing else, you can do this for under $20.

Instructions:

  • Most houses these days have wi-fi connected security cameras that can livestream, a broom or some other strong pole(s), and tape
  • Decide on the best place to view your roof from (e.g. upstairs window)
  • Duct tape your camera to the tip of the pole, making sure it’s secure
  • If you need height, duct tape together a few of them making sure the pole overlap is enough to stay strong when you extend it
  • Open the camera app and start livestreaming the camera
  • If you want to and have the function, hit the “Record” button
  • Extend your camera-on-a-stick towards the roof with a firm grip, and inspect it
  • Watch video on phone later

DONE. Easy Peasy.

Drone

Pros: Easy, Good View, Maneuverable

Cons: Expensive unless you already own one or want a nice one, Crash/loss Potential, Beware drone flying laws

Because the stupid app is stupid, I tried to tape a camera to the drone which otherwise flies decently for something under $50

Materials: Drone, Phone

Cost: At least $200 for a decent drone (any less and it’s worthless and possible security risk), $15 subscription fee for app

Would be fine if you already have a good quality drone or want one to begin with, but I wasn’t paying $200-400 for a drone just to look at the roof. Instead, I spent 2 weekends trying this fancy method with 2 cheap drones ($130 together) before I realized I wasted good money. This is useful and easy only if you already have a decent quality drone and/or live in a one-story house. My first drone could fly decently, but the app (3rd party separate from the drone seller) not only failed to load, but tried to hack into the internet system of my house both times I tried to unsuccessfully launch it. So, I got a second drone with its own viewing screen and no need to connect an app, but the drone itself was utter garbage and was impossible to fly. Absolute waste of money. Determined to make it work, I paid for the smallest camera ($42.99) I could find (after hours of scanning the internet) that didn’t need phone connection to work, just an SD card. I taped it to my first drone and tried to fly that up to the roof. Terrified that it would fly off on its own (I’m not very good at flying drones, so I crash often), I tied a string to it, but it didn’t matter in the end because the range between the controller and drone was about 1 story tops. Total FAILURE and an utter waste of money ($172.97. OUCH)! The only good things that came about this is that, 1) Now I know I don’t really care to fly drones anymore, and 2) It’s a fun gadget to antagonize the dog with.

Instruction: Very simple

  • Connect drone to phone
  • Fly up
  • View roof
  • Don’t Crash
  • Review footage

Complete!

Others

Similar to the drone, you could try a Rock Crawler RC Car with a camera either built-in or taped to it. It’s easier to control than a drone, especially the slower speed of the Rock Crawlers, though beware the tilt of the roof, if you can lift it onto the roof with a grabber arm or something. Just don’t drive off the edge! I’d tie a string or fishing line around it in case it does (just don’t get it tangled in the wheels).

An Endoscope could be useful? You could shove it along the roof? It’s flexible enough to snake around things, though the small field of view might not be so great.

Pet Rat with Camera and Leash… Maybe not. A hawk might get it.

You could hire someone to permanently mount a Solar Powered Camera somewhere up there, like the chimney. That way you can view it at any time. Weather could be a problem, as well as retrieving it if you needed to.

Ford Cargo Area Badge Light Installation with Pictures

written 3/31/25, updated 3/31/25

Overview

What

Installing a Cargo Area Badge Light on a 2024 Mustang Mach-E

Why

For fun (had excess Fordpass points to use!)

Time and Effort

Time: 20 minutes

Effort: Easy

Materials and Cost

Supplies

Ford Cargo Area Badge Light

Scissors

Painter’s Tape

Cost

$10.55 shipping + tax (Used 23,800 FordPass points, $119.00 MSRP)

Process

  • Open trunk
  • Remove cargo cover, if using

Push up on the end to get it to snap out of the hook

  • Read instructions
  • Unroll the guide and cut around the outside lines
  • Cut the interior box as instructed
  • Locate the portion of the trunk door interior where it’s going to go, then tape the template onto it

The trim panel in the middle is so useful to have. Just line the paper up with it, words legible. I put the painter’s tape up and creased it out of the way for easy access because the paper keeps wanting to roll up on you.

  • Find the little alcohol packet that comes with the kit (I didn’t even realize it came with one. D’oh!) and wipe the area within the cutout in the middle
  • Pay attention to the instructions here! Locate the mount and orient it correctly within the middle cutout. Tab to the LEFT (otherwise your badge will be upside down)
  • Peel off the adhesive backing, fit it into the cutout, and press firmly along the length of the mount for at least 60 seconds

Boom, baby! Ehh, it’s a little off-center, but that’s okay.

  • Remove the template
  • Now for the hardest part of the install: connecting the light, itself
  • Look at the bottom of the badge light and note the rectangle where that will fit in the tab that needed to be pointed left. You have to first push that into the tab and then press firmly so that the horizontal lines snap into the grippers on the mount. You need to hear a bunch of clicks (Notice that it uses CR2450 x2 batteries)
  • This is a little bit easier to say than do (at least for me), so I employed the use of the painter’s tape to give me a general idea of where the tab was+
  • Several clicks later, VOILA!
  • Peel off the protective film and enjoy your new badge light!

Outside and inside view. I wonder if the glare will bother me…

COMPLETO!