Tag: long

Ford Mustang Mach‑E Dimensions

writ­ten 9/8/26, updat­ed 9/8/26

Yes, I know this isn’t a GT. It’s a Select AWD

Dimensions

Here, I have record­ed some dimen­sions for the Mach‑E for ref­er­ence. I’ve includ­ed exte­ri­or specs for all 3 mod­els, but inte­ri­or is for the GT/Rally

2020 — present (2026)

NOTE: The pic­tures have cov­ers and mats. The mea­sure­ments are for with­out them. Please be aware that mea­sure­ments are func­tion­al­ly approx­i­mate and not 100% exact

Exterior

Accord­ing to Ford’s Offi­cial Tech Specs

Mus­tang Mach‑E Select ER, AWDMus­tang Mach‑E GTMus­tang Mach‑E Ral­ly
Wheel­base117.5″117.5″117.5″
Length185.6″186.7″187.0″
Width74.1″74.1″74.1″
Height64″63.3″64.9″
Track Width, F63.5″63.5″63.5″
Track Width, R63.4″63.4″63.3″
Ground Clear­ance6.2″5.0″5.8″
Curb Weight4,748 lb4,993 lb5,016 lb

Con­ver­sion Sum­ma­ry — Aver­age and Approx­i­mate

Wheel­base: 9′ 9″

Length: 15′ 6″

Width: 6′

Height: 5′ 4″

Weight: 2.3 tons

Trunk Cargo Interior

Note: This is for the GT Ral­ly, so there’s less space inside than the Select and Pre­mi­um mod­els. I have car­go cov­ers and mats. Num­bers are cal­cu­lat­ed to be with­out the cov­ers and mats. All mea­sure­ments are approx­i­mate, not exact

Open­ing Width (Yel­low): 43″ down to 42″

Trunk Height (Orange): 25″ pil­lar; 28″ mid

Trunk Depth (Green): 30.75″ edge; 33″ mid

Open­ing Diag­o­nal (Pur­ple): 47″

Car­go Width (Pink): 42.5″ wheel bump; 46″ vents

Car­go Seats-down Length (Light Blue): 59″ to top of seats (not includ­ing head­rest)

Trunk Rim to Info­tain­ment Screen (White): 101″

Rear Seat Interior

Note: This is for the GT Ral­ly, so there’s less space inside than the Select and Pre­mi­um mod­els. The pic­tures show a dog seat cov­er. Mea­sure­ments are for with­out the cov­er, front seats at mod­er­ate posi­tion­ing, and all approx­i­mate.

Seat Length (Yel­low): 50″

Seat Height (Pur­ple): 25″ (to top of seat, exclud­ing head­rest)

Seat Depth (Orange): 19.25″

Height (Green): 36″ max (rear); 33″ min (thigh)

Car­go Length (Red): 52″ min (arm­rest); 57″ max (door)

Footwell (White): 10″ min (mod­er­ate posi­tion­ing)

DIY Simple Dog Urine Collection Stick (No Bending Down!)

Writ­ten June 2022, updat­ed 7/2024

What

Pole for col­lect­ing dog urine for sam­pling

Sup­plies

Any stick or pole, hose clamps, col­lec­tion con­tain­er, screw­driv­er

Time

10 Min­utes

Mate­ri­als Used

  • 25–38mm Hose Clamp (x2)
  • 10–16mm Hose Clamp (x1)
  • 48 in x ⁷⁄₁₆ in (L x W) Gar­den Stake (x1)
  • Ster­ile Col­lec­tion Cup (x1)

Cost

ItemAmount
48in Pow­der Coat­ed Met­al Gar­den Stake$2.33 (1 qty)
60 pc Assort­ed Hose Clamp Kit$12.99 (1 kit)
Ster­ile Col­lec­tion Cup$7.99 (5 qty)
Total$23.31
Total per Col­lec­tion Stick$4.59

Process

  • Make a ring to place the col­lec­tion cup in with­out it falling through all the way
  • Use a small­er clamp to con­nect the pole to the large ring
  • Place col­lec­tion con­tain­er of your choice into ring
  • Make sure your pet isn’t afraid of it before using to col­lect
    2 clamps togeth­er
    small­er clamp
    pole con­nect­ed

    Notes

    • Used a plas­tic gar­den stake because: it’s rigid, has ridges on there to pre­vent the clamp from shift­ing, easy to clean, resist rust with plas­tic coat­ing
    • Any width gar­den stake or pole can be used. I just hap­pened to have the ⁷⁄₁₆ inch one
    • The largest hose clamp avail­able was the 25–38mm, but the nice thing about them is that you can just con­nect small­er ones togeth­er (by feed­ing the ends into the neigh­bor­ing tight­en­er) to make a larg­er one
    • Adding a non-slip han­dle is as easy as wrap­ping vet wrap which can there­fore be changed out when you want to. Or what­ev­er you want to wrap it with